• Large Double-group Chamber Vacuum Furnace KD-V6

    Large Double-group Chamber Vacuum Furnace KD-V6

    Large Double-group Chamber Vacuum Furnace KD-V6


    Reflow soldering
    Typically high number of voids cause a large non conductive area


    Vacuum soldering
    Very low number of voids, Typically < 2 % leads to best Thermal Conduction


    Void Less


    Flux Less


    Ultra Clean



    1. Void Less

    Void reduction between the joining partner (<2%) for better heat transfer . (depending on the device surface quality and selection of process gas). below ordinary conditions void of more than 30% , increase bonding strength.


    2. Excellent Temperature Control

    latest PLC archtecture and MFC for precision gas flow control , make temperature consistency and precision temperature control .have a good protection .

    Water Cooling system : water cooling tank and cross cooling tube ensure it can cooling rapidly in high temperature environment.


    3.Very Short Soldering Times

    Cycle time is short. welding cycle time about 10 min 。(380-450 ℃ soldering temperature, ooling temperature to 45 ℃。 nitrogen filling, welding vacuum degree is lower than 5*10ˉ¹Pa ), shorter than the other equipment;


    4. Variation Process gas

    Standard : vacuum chamber filling the 100% nitrogen .
    Option : 100% hydrogen, N2 & H2 forming gas , HCOOH, ArH2 Plasma process gas



    5. Good human-machine interface

    The Windows operating system, provide programming, system status query, system debugging/set, alarm indicator and such as user interface, programming is simple & easy use


     6. Advanced PLC and Safety System :

    PLC system prevent accidental eg : Hydrogen leakage .
    Ultra high temperature alarm, excessive temperature raising alarm
    Cooling water pressure detection system, low pressure alarm
    HCOOH tank protective cover to prevent accidental explosion of HCOOH tank
    Formic acid, hydrogen gas leak detection alarm system
    Safety system of automatic pressure relief if over pressure
    Hydraulic pallet -- so as to avoid causing water to undertake circuit damage
    Automatic hydrogen burning function, Avoiding hydrogen pollution.


    Brand touch screen+PLC controlling system
    Welding area:420*550*120mm*3 layers(2 groups)
    Furnace height : each layer is 120mm
    Single layer weight bearing : 20KG
    Standard Soldering temperature : 0-450°C
    Optional Soldering temperature : 1200°
    Controlling system : Temperature controlling system+
      Vacuum system+Cooling system+ Atmosphere system +software controlling system
    Temperature raise rate : ≥120℃/min
     Max temperature cooling rate : ≥60℃/min
    Cooling system : water cooling + gas cooling

Copyright © 2013 Beijing Chengliankaida Technology.co.,LTD .All Rights Reserved 犀牛云提供企业云服务