PCB Engraving Machine KD-ZDK300
PCB Engraving Machine KD-ZDK300
1.Work style: 2.5 d double processing way.
2 Control handle is composed of ARM + FPGA embedded control system, control handle with double USB interface, which can realize master-slave USB communication mode, namely as the main USB devices directly read U disk data, as from a USB device and computer communication, can completely escape Computer work;
3. Full modular drive way, 3 + stepper motor module driver chip joint driver XYZ axis movement;
4.All casting body, Y axis movement driving beam arm movement, in the process of engraving and drilling, circuit board still has no displacement;
5.Random configuration processing auxiliary data processing software, without any external software to realize the data directly into the machine;
6.Equipment with X, Y, Z axis limit function of hardware and software;
7.High power spindle motor, the machining accuracy is higher, with power off memory function, no worries about power;
8.Handle the man-machine interface: 128 * 64 matrix LCD + 18 multi-function key, the operation is simple, intuitive;
9.With PC control software, and can provide a free upgrade service over a long period;
1.Work style: 2.5 d double processing way.
2 Control handle is composed of ARM + FPGA embedded control system, control handle with double USB interface, which can realize master-slave USB communication mode, namely as the main USB devices directly read U disk data, as from a USB device and computer communication, can completely escape Computer work;
3. Full modular drive way, 3 + stepper motor module driver chip joint driver XYZ axis movement;
4.All casting body, Y axis movement driving beam arm movement, in the process of engraving and drilling, circuit board still has no displacement;
5.Random configuration processing auxiliary data processing software, without any external software to realize the data directly into the machine;
6.Equipment with X, Y, Z axis limit function of hardware and software;
7.High power spindle motor, the machining accuracy is higher, with power off memory function, no worries about power;
8.Handle the man-machine interface: 128 * 64 matrix LCD + 18 multi-function key, the operation is simple, intuitive;
9.With PC control software, and can provide a free upgrade service over a long period;
The machining accuracy:±0.05mm; Max size :300mm×300mm;
Repeat accuracy:0.01mm;
Minimal processing line width:4mil;Minimum line gap : above6mil ;
Applicable to drill flower:0.3mm~3.175mm Drill shank:3.175mm;
Apply to milling cutter:1mm~3mm The handle:3.175mm;
Processing speed:0~3m/min(Real-time adjustable);
Frequency conversion motor spindle motor: 800 w top speed of 40000 RPM.
Stepping motor: 35 w four phase stepper motor * 3;
Shaft drive mode: full import screw drive;
The spindle movements itinerary:60mm;
Working power supply:AC220V/50Hz 1000W;
Dimension: the body :580mm×610mm×550mm;
Control box:400mm×250mm×590mm;
The net weight:105KG。